by Prashant | Nov 20, 2026 | Food Processing Machinery
Direct answer: Okara is the wet fibre-and-protein residue left after soymilk or tofu making. It holds 70–80% water and spoils quickly, so it must be dewatered and dried soon after production. Research shows drying method changes protein solubility, digestibility and...
by Prashant | Nov 20, 2026 | Food Processing Machinery
Direct answer: Plan allergen changeovers on spice and powder lines as a written procedure: a set cleaning method, a frequency tied to line changeover, named responsibility, and checks that prove the equipment is clean. Dry cleaning with vacuums, brushes and wipes is...
by Prashant | Nov 20, 2026 | Food Processing Machinery
Direct answer: Wash water cost depends on how much fresh water each tonne of produce needs, how much water you reuse, and how well you control organic load and chlorine in the reused water. Measure litres per tonne first. Then add screening and filtration,...
by Prashant | Nov 20, 2026 | Food Processing Machinery
Direct answer: Plan a rice bran oil plant backwards from the bran you can collect fresh. Bran must be stabilised within hours of milling, then conditioned and solvent-extracted, and the crude oil refined. A 200 tonne-per-day paddy mill yields roughly 16–24 tonnes of...
by Prashant | Nov 19, 2026 | Food Processing Machinery
Direct answer: Estimate turmeric curing steam from a heat balance: heat to raise the rhizomes and vessel to about 98–100 °C, plus losses during heat-up and holding, divided by the usable heat per kilogram of steam. In the illustrative example below, a 1,000 kg batch...