by Prashant | Nov 20, 2026 | Food Processing Machinery
Direct answer: Choose a blancher by product shape and size, hourly capacity, the enzyme-inactivation target and your water and steam limits. Steam suits most pieces and cuts leaching; hot water gives even heating but loads effluent. Prove the setting with a peroxidase...
by Prashant | Nov 20, 2026 | Food Processing Machinery
Direct answer: Edible oil that is still hazy after filtration is usually one of three things: fine solids or water that the filter did not remove, soap or gums that slow clarification, or wax and high-melting fat that crystallise when the oil cools. Warm a sample and...
by Prashant | Nov 20, 2026 | Food Processing Machinery
Direct answer: Red chilli powder loses colour mainly from heat during drying, oxidation and light during storage, and in grinding. The ASTA value, which measures extractable colour, also changes with particle size, so compare batches at the same fineness. Control...
by Prashant | Nov 20, 2026 | Food Processing Machinery
Direct answer: Choose a peeling method by product shape, peel loss you can accept, effluent limits and the downstream step. Abrasive peelers are simple but remove flesh unevenly. Lye peels irregular surfaces well but creates caustic wastewater. Steam avoids chemicals...
by Prashant | Nov 20, 2026 | Food Processing Machinery
Direct answer: Okara is the wet fibre-and-protein residue left after soymilk or tofu making. It holds 70–80% water and spoils quickly, so it must be dewatered and dried soon after production. Research shows drying method changes protein solubility, digestibility and...