Last updated: 22 November 2026. By the GTI Group editorial team, Genex Tech Industries LLP (Food Tech Projects), Kolkata, India.

Direct answer: Aflatoxin in RUTF (ready-to-use therapeutic food) comes almost entirely from the peanuts. It cannot be reliably removed once in the paste. Control it at the peanut stage with tested, segregated lots, cleaning and sorting, roasting, blanching to remove skins, and colour sorting. Then confirm each batch against the UNICEF limit of 10 µg/kg total aflatoxin.

Key takeaways

  • UNICEF’s RUTF specification sets total aflatoxin at 10 µg/kg maximum, moisture at 2.5% and water activity at 0.6.
  • Aflatoxin is unevenly spread in peanut lots, so sampling plans matter as much as the test.
  • Roasting, blanching and sorting reduced aflatoxin by a combined 89% in one peanut butter study, but contaminated lots should still be rejected.
  • Good hygiene for low-moisture foods also controls the Salmonella risk.
Roasted peanut kernels
Roasted peanuts (illustrative stock photo). Image: Choo Yut Shing from Singapore, Singapore, Wikimedia Commons, CC BY 2.0 (source, licence).

Why is aflatoxin the main risk in RUTF?

RUTF is a peanut-based, energy-dense paste for treating severe acute malnutrition in young children. Peanuts are a known aflatoxin risk. Aflatoxins are toxins made by some Aspergillus moulds, and children are especially vulnerable to them.

The finished paste is a low-moisture food. It does not support mould growth, but it also has no step that destroys aflatoxin. So aflatoxin control is about selecting and cleaning the peanuts.

What limits does the UNICEF RUTF specification set?

The UNICEF specification for RUTF (S0000240) gives the key safety and quality limits below. Always work to the current version supplied by the buyer.

Parameter UNICEF RUTF specification
Total aflatoxin 10 µg/kg maximum
Moisture 2.5% maximum
Water activity 0.6 maximum
Salmonella 0 cfu per 25 g
Enterobacteriaceae 10 cfu per g maximum
Texture Smooth paste with small particle size (for example below 500 microns), no grittiness

The specification refers to the Codex code of practice for preventing and reducing aflatoxin in peanuts (CXC 55-2004) and the Codex hygiene code for low-moisture foods (CXC 75).

How does aflatoxin get into peanuts?

Mould can infect peanuts in the field, especially under drought stress, and grow during slow drying or damp storage. The Codex code says water activities above 0.70 at 25 °C allow moulds to grow. It also recommends drying peanuts to moisture levels generally below 10% for storage.

Contamination is concentrated in a small share of damaged, shrivelled, discoloured or mouldy kernels. That is why sorting works, and why a small sample can miss a contaminated lot.

Which process steps reduce aflatoxin in an RUTF plant?

The table follows peanuts from intake to paste. Each step either keeps contaminated kernels out or removes them.

Step Purpose Control point
Supplier approval and lot testing Accept only tested, low-aflatoxin lots Representative sampling plan; certificate plus own test
Dry, cool storage Prevent mould growth Moisture, temperature, condensation, pests
Cleaning and grading Remove foreign matter, light and damaged kernels Screen and aspirator settings
Roasting Flavour, dry-down; some aflatoxin reduction Time-temperature profile, uniform colour
Blanching (skin removal) and splitting Remove skins and heart; expose defects Skin removal efficiency
Sorting (optical and hand) Reject discoloured, damaged kernels Reject rate; check rejects and accepts
Grinding and mixing Fine, smooth paste with other ingredients Particle size, temperature
Finished product testing Verify aflatoxin and microbiology Each batch to the specification

How much do roasting, blanching and sorting reduce aflatoxin?

In a peanut butter study by Siwela and colleagues (2011), roasting at 160 °C reduced aflatoxin by 51%. Blanching to remove skins removed a further 27%, and grinding a further 11%, for 89% in total.

Treat these numbers as evidence that processing helps, not as a way to rescue a bad lot. Reductions vary with contamination level and equipment, and the RUTF limit applies to the finished product.

How should a plant sample and test peanuts?

Use a sampling plan designed for aflatoxin, because contamination sits in a few kernels. A small grab sample can pass a lot that fails.

  1. Take many incremental samples from across the lot, not from one bag.
  2. Combine and grind a large aggregate sample before sub-sampling.
  3. Test with a validated method in a competent laboratory, with rapid tests for screening if appropriate.
  4. Segregate lots by result: accept, re-sort, or reject, as the Codex code recommends.
  5. Test finished batches against the RUTF specification before release.
  6. Keep records that link each batch to its peanut lots.

Follow the sampling plan and method references in the buyer’s specification. Codex has published sampling plans for aflatoxins in peanuts.

Which machines support aflatoxin control in an RUTF line?

GTI’s RUTF processing plant page lists a peanut roaster for flavour development and aflatoxin risk reduction, a grinder or colloid mill for fine paste, mixing, homogenisation, deaeration and filling. It also lists aflatoxin testing integration, nitrogen-flushing packaging and metal detection. A full plant also needs cleaning, blanching and sorting equipment ahead of the roaster or grinder, plus sampling points.

For buyers, the key questions are:

  • Does the roaster give even colour across the bed, so no kernels are under-roasted?
  • How effective is skin removal in the blancher?
  • Where are rejects collected, and can they be checked?
  • Can the grinding line meet the particle size target without overheating?
  • Is the layout designed for dry cleaning and hygienic zoning, as low-moisture foods need?

For the full plant layout, see our RUTF and RUSF processing plant guide. For sorting machines, see optical colour sorter selection.

What about Salmonella and moisture?

RUTF is a low-moisture food, and Salmonella can survive in it for long periods. Codex CXC 75 calls for a strict hygiene programme: control water in dry areas, separate raw and finished-product zones, and monitor the environment. The UNICEF specification requires Salmonella absent in 25 g, Enterobacteriaceae at 10 cfu/g maximum, moisture at 2.5% maximum and water activity at 0.6 maximum.

Frequently asked questions

Can aflatoxin be removed from finished RUTF paste?

Not in practice. Control has to happen at peanut intake, sorting, roasting and blanching. Paste that fails the limit should not be released.

Is roasting enough to make contaminated peanuts safe?

No. Roasting reduced aflatoxin by about half in one study, which is not enough to rescue a highly contaminated lot. Reject or re-sort lots that fail intake testing.

What is the aflatoxin limit for RUTF?

The UNICEF RUTF specification sets total aflatoxin at 10 µg/kg maximum. Buyers may add their own requirements.

Why does particle size matter in RUTF?

A fine paste (for example below 500 microns) avoids grittiness. UNICEF also notes that poorly ground sugar can cause oil separation and leakage from the sachet.

Talk to GTI about your project

Planning an RUTF or peanut paste production line? Contact Genex Tech Industries LLP (GTI Group) to discuss your material, production capacity, product specifications and utility requirements. To help us respond usefully, please share your product or raw material, required capacity, feed and final moisture (state wet or dry basis), finished-product specification, available utilities, installation location and project timeline.

Email: mktg@foodtechprojects.com
Call or WhatsApp: +91-93300-77417 | +91-87774-75596 (WhatsApp)
Website: https://foodtechprojects.com/
For Industrial Dryers: https://gtidryers.com

This article gives general technical guidance. Figures marked as illustrative are examples, not plant guarantees. Equipment selection and performance for your material should be confirmed through trials and engineering assessment.

References

  1. UNICEF Supply Division. Ready-to-Use Therapeutic Food (RUTF) specification S0000240. www.unicef.org
  2. Codex Alimentarius. Code of Practice for the Prevention and Reduction of Aflatoxin Contamination in Peanuts (CXC 55-2004). www.fao.org
  3. Siwela A.H., Mukaro K.J., Nziramasanga N. (2011). Aflatoxin carryover during large scale peanut butter production. Food Nutr Sci 2:105-108. doi.org